Foto © Markus Pillhofer
Foto © Duccio Malagamba
Foto © Duccio Malagamba
Foto © Duccio Malagamba
Foto © Duccio Malagamba
Bild © Coop Himmelb(l)au
Bild © Coop Himmelb(l)au
Bild © Coop Himmelb(l)au
Bild © Coop Himmelb(l)au

Martin Luther Church Hainburg

 Zurück zur Projektliste
Hauptplatz, 2410 Hainburg, Österreich

The protestant church consists of four main building elements: a sanctuary, a community hall, a sacristy, and a sculptural bell tower. Coop Himmelb(l)au derived the shape of the building from a huge “table”, with its entire roof construction resting on the legs of the “table” – four steel columns.

The roof with its striking three skylights is a key element of this building. The exterior skin is made of 8 mm thick three-dimensionally curved steel plates welded on a frame construction. The roof elements were constructed and manufactured with shipbuilding technologies. One important role model was Le Corbusier, for his references to shipbuilding, but also because of his La Tourette monastery.

The 20 meter high sculptural bell tower at the forecourt is a vertical self-supporting steel structure and completes the building ensemble as highly visible landmark.

The play with light and transparency has a special place in this project. The light comes from above: three large winding openings in the roof guide it into the interior. The church interior itself is not only a place of mysticism and quietude but also an open space for the community.

The sanctuary gives access to the glass-covered children’s corner, illuminated by daylight, which accomodates also the baptistery. The actual community hall is situated behind it: folding doors on the entire length of the space between the two main chambers allow for combining them to one continuous spatial sequence. A folded glass façade on the opposite side opens the space towards the street.

A longitudinal slab building along a small side alley flanks both main spaces and comprises the sacristy, the pastor’s office, a small kitchen and other ancillary rooms. A handicapped accessible ramp between the three building components accesses the church garden on higher ground.

Association „Freunde der Evangelischen Kirche in Hainburg/Donau”, Austria

Evangelische Pfarrgemeinde A.B. Bruck a.d. Leitha – Hainburg/Donau, Austria

Planning: Coop Himmelb(l)au – Wolf D. Prix / W. Dreibholz & Partner ZT GmbH
Design Principal: Wolf D. Prix
Design Architect: Sophie-Charlotte Grell
Project Architect: Martin Mostböck
Project Team: Steven Baites, Daniel Bolojan, Victoria Coaloa, Jörg Hugo, Martin Jelinek, Volker Kilian, Martin Neumann,

Structural engineering: Bollinger Grohmann Schneider ZT GmbH, Vienna, Austria
Construction survey: Spirk & Partner ZT GmbH, Vienna, Austria
Main works / finishing: Markus Haderer Baubetrieb Ges.m.b.H, Hainburg/Donau, Austria
Steel construction (roof / tower): OSTSEESTAAL GmbH, Stralsund, Germany
Steel construction (façade): Metallbau Eybel, Wolfsthal, Austria
Fibre cement cladding: Eternit-Werke Ludwig Hatschek AG, Vöcklabruck, Austria
SFK GmbH, Kirchham, Austria
Altar: Idee & Design, Stainz, Austria
Seating: Braun Lockenhaus, Lockenhaus, Austria

Start of Planning: 2008
Start of Construction: 08/2010
Opening: 04/2011

Project data
Site area: 420 m²
Sanctuary for 50 people, community space und ancillary rooms
Total gross floor area: 289 m²
Height (slab building / community space): 3,5 m
Height sanctuary: 6 m
Height roof: 10 m
Length: 25 m
Width: 10-17 m
Height bell tower: 20 m

Andere Projekte von Coop Himmelb(l)au

Museum and Theatre Complex
Kemerovo, Russland
Dalian International Conference Center
Dalian, China
Akron Art Museum
Ohio, USA
BMW Welt
Munich, Deutschland
Museum of Contemporary Art & Planning Exhibition (MOCAPE)
Shenzhen, China