A Woven Facade of Metal Tubes

John Hill
9. 6月 2017
Photo © Stefan Tuchila

Project: BE OPEN, 2016
​Client: Vinci Immobilier
General contractor: CSB
Architect: Brenac & Gonzalez et Associés
Developer: SEMAPA
Environmental consulting: ALTO Ingenierie
Acoustics: AVLS
Structural engineering: TERELL Groupe
Façades engineering: Facades Design
Landscape architect: TN+
Inspection firm: Batiplus

East elevation (Photo © Stefan Tuchila)

BE OPEN is an office building that is part of the huge Paris Rive Gauche development in the city's 13th arrondisement. Located on city block A11 – a narrow, tapered site between railroad tracks and Avenue de France – the building is visible on all four sides. Given this condition, Brenac & Gonzalez et Associés designed the nine-story building with a skin whose reflectivity and shadow lines that garner attention among its predominantly glassy surroundings. 

Setback at the 6th floor (Photo © Stefan Tuchila)

What looks solid from afar is in fact made up of tightly spaced aluminum tubes. Oriented vertically across the building's spandrels, and intermittently over its windows, the tubes angle in and out in a slightly irregular pattern. A flat area on the east side, for instance, subtly calls out the main entrance to the building. 

The faceted pattern of tubes is interrupted by flat sections (Photo © Stefan Tuchila)

The anodized aluminum tubes are mounted to stainless steel shelves whose reflectivity gives the impression of a continuous wall when seen from below, and which also reflects light and images of the outside world (like a camera obscura) into the interior. To assuage too much direct sunlight in the office spaces, the horizontal bands of operable windows are outfitted with automated fabric awnings.

Reflective stainless steel shelves support the rods. (Photo © Stefan Tuchila)

The appeal from such a facade design is found in the way it interacts with the sunlight. The photos here reveal that the natural anodized finish of the tubes suitably reflects the ever-changing conditions: be it sunny, overcast, or "the magic hour" when the settig sun bathes the building in color. Maintenance and cleaning of the tubes are certainly issues, but the aesthetic effect looks like it should pay off – at least when it comes to luring tenants in an area with many new office buildings.

In this view, the tightly spaced tubes and resulting shadows create a moiré pattern. (Photo © Sergio Grazia)
Parapet detail showing the angled aluminum tubes and stainless steel support. (Drawing: Brenac & Gonzalez et Associés)
The tube modules are organized into four types with one angle, two types with two angles, and one type that is flat. (Drawing: Brenac & Gonzalez et Associés)
Griesser supplied 866 Solozip fabric awnings. (Photo courtesy of Griesser)
The tubes are too sporadic to serve as shading, so the awnings are necessary. (Photo © Stefan Tuchila)
Context plan (Drawing: Brenac & Gonzalez et Associés)
Ground floor and upper floor plans (Drawing: Brenac & Gonzalez et Associés)
North-south section looking east (Drawing: Brenac & Gonzalez et Associés)

このカテゴリ内の他の記事